| Customization: | Available |
|---|---|
| Feature: | Durable,Anticorrosive |
| Metal Pipe Connection: | Galvanized Iron |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Name | GFRP Rod Tent Pole |
| Material | Fiberglass Reinforced Plastic |
| Color | Black/White/Custom |
| Diameter | 5mm/6mm/7.0mm/7.9mm/8.5mm/9.5mm/10mm/12.7mm/15mm |
| Length | Custom as demand |
| Application | Fiberglass Pole for Tent and telescopic poles are widely used in camping tents, personal tents, disaster relief tents, beach umbrellas; Rainproof waterproof cloth, sunshade waterproof cloth, tent waterproof cloth, small waterproof cloth, car side roof tent, sunshade, etc. |
| Outside diameter mm |
Internal Diameter mm |
Thickness mm | Length m |
pole weight g/m |
| ∮6 | 3.2 | 1.40 | 1.000 | 39.39 |
| ∮6.9 | 3.3 | 1.85 | 1.000 | 55.55 |
| ∮7.9 | 3.9 | 2.00 | 1.000 | 71.71 |
| ∮8.5 | 4 | 2.25 | 1.000 | 84.84 |
| ∮9.5 | 4.3 | 2.60 | 1.000 | 109.08 |
| ∮11 | 4.5 | 3.25 | 1.000 | 152.51 |
| ∮12.7 | 4.9 | 3.90 | 1.000 | 207.05 |
| ∮15 | 6 | 4.50 | 1.000 | 284.82 |
Things to know before making a Fiberglass Pole for Tent:
There are 2 types of rods:
(1) GFRP tent poles with Insert - An insert is a tube (or sleeve) that is usually glued into one hollow end of the tent pole section and protrudes about 3 inches. This insert allows you to stack one section on top of another.
(2) Rods without inserts - these are hollow rods (sections) without inserts
To make a set of rods, it's usually best to draw it out on paper to determine how many sections and parts you'll need for each rod. Typically, you will need more sections with inserts than without. For example, if you wanted to make a pole with 4 sections (this would make a 6 foot pole), you would need 3 sections with inserts and 1 section without inserts. The reason you need the last part without an inset is: the picture stacks a part with an inset on top of another. If the last section has inserts, it won't allow you to insert the ends into the ends of the rod. So if you use the last part without the inserts, you will have a hollow end on each end of the rod so you can put one end on each end of the rod.
How to make GFRP Rod Tent Pole?
Step 1: Put your poles in the order you want. (If necessary, cut them into appropriate lengths with a hacksaw or other tools. It is better to have a pipe cutter (we have these for your convenience). Note: If you need to shorten the carbon fiber pole, use Stick adhesive tape where it needs to be cut to prevent wear.
Step 2: Tie one end to the free end of the shock absorber rope and push it into the hollow end of the rod. Chapter. Pass your shock-absorbing rope through each pole.
Step 3: At the other end, tie the other end to the shock-absorbing rope. Push the second end upwards into the other hollow end. Pole. Test tension; You don't want it to be too tight. When they are folded, they want to bounce off. If you are nervous and need it. To readjust, re-knot. If the shock-absorbing rope is not tight enough, take off the end and fasten it again.
| Main Processing Technic | Products Advantage |
| 1. Protruded Profile/Continuous Formation | 1. High Voltage Protruded profile and Hand Layup Shell |
| 2. SMC/BMC Molding Products | 2. Professional engineer with Design support with 24 years experience |
| 3. Hand layup Products (Option:With Pattern Print) | 3. Customize Large size Products. |
| 4. RTM/Infusion With air bag | 4. One-stop service (Purchase/Order/Tranportation ) |
){kind=link}