Product Description
The fiberglass reinforced plastic cross arm is a new type of glass fiber based power equipment, which is impregnated with epoxy resin through thermosetting of the mold. It is widely used in overhead insulated lines to make various switches, arresters and other fixed crossbar switches.
Details Images
1. The surface is made of polyester surface felt to improve the anti-aging property of the product;
2. There is a polyurethane foaming agent in the tube to increase the strength of the cross arm and prevent rainwater penetration;
3. The rectangular tube has plastic caps at both ends.
| Width/Height/Thick ness mm |
Weight g/m |
|
| 50×50×4 |
50×50×4 |
with cap die |
| 50×50×6 |
2000 |
|
| 70×70×5 |
2540 |
|
| 75×75×5 |
2800 |
with cap die |
| 100×100×5 |
3750 |
with cap die |
| 100×100×6 |
4500 |
|
| 100×100×10 |
7060 |
with cap die |
Product advantage
Light weight.
Good strength.
Impact resistance.
Excellent dielectric properties.
Corrosion resistance
Heat resistance
| Solid / hollow cross arms |
| Polyurethane foam filling |
No polyurethane foam filling |
| Improve the rigidity of the cross arm |
Weaker hardness |
| Prevent plastic deformation |
Easy to deform |
Main product
Pultrusion process
FRP tent pole
fiberglass reinforced plastic tent pole is made of glass fiber untwisted roving as reinforcement material,unsaturated polyester resin as matrix,
and pultruded glass fiber tube. Its light weight, high strength, anti-corrosion, and bright colors make it the best product for supporting skeletons in tourist tents.
Pultrusion process
FRP Flat Bar
Anti-corrosion flat strip is made of unsaturated polyester resin, alkali-free glass fiber yarn, and processing aids.It adopts special formula and is processed by scientific production process. The anticorrosion purlin has reasonable design and special raw materials, so that the product has the strength of steel,and fundamentally solves the weakness of metal steel that is easy to corrode. It has the advantages of high strength, good corrosion resistance, high installation efficiency and long-term reliability.
Molding process
FRP water tank
The whole fiberglass reinforced plastic water tank is assembled by high-quality SMC water tank board. Its characteristics are the use of food-grade resin, so the water quality is good, clean and pollution-free, the product has high strength, light weight, corrosion resistance, beautiful appearance, long service life, convenient maintenance and management.
Molding process
FRP Grating
1. Corrosion resistance
2. The flame retardant
3. Prevent slippery
4. Antioxidant and weather resistance
5. Beautiful appearance,easy maintenance
6. Adiabatic insulation
7. High comprehensive economic benefits
Hand lay-up
FRP fish tank
1. Not easy to age, not deformed or weathered at 65 degrees Celsius.
2. Good heat insulation and thermal insulation ,effect (thermal conductivity 0.14kcl / mhr degrees Celsius)
3. Non-toxic, non-polluting, and meet sanitary standards.
4. The surface is smooth and clean without moss and prevents the growth of microbial attachments.
5. Tough and impact resistant.
6. Chemical resistance and long service life
Packing & Delivery
Packing Shipping
1.Carton + pallet 1.Waterway transportation
2.Export wooden box 2.air transport
Company Introduction
Shengze is a leading and profession manufacturer of fiberglass products for over 20 years. The main products are various kinds of frp pultrusion profiles, SMC products , FRP hand lay out product and vacuum infusion products. The annual production capacity is about 8,000 tons.
Main Processing Technic Products Advantage
1.Protruded Profile / Continuous Formation 1.High Voltage Protruded profile and Hand Layup Shell
2.SMC / BMC Molding Products 2.Professional engineer with Design support with 24 years experience
3.Hand layup Products (Option: With Pattern Print) 3.Customize Large size Products.
4.RTM / Infusion With air bag 4.One-stop service (Purchase/ Order / Tranportation )
FAQ:
1. What is your minimum order quantity?
Our MOQ is 1 meter.(Without limiting sizes and specification,according to actual situation)
2. How can I get samples to check your quantity?
We can offer samples for free.
3. Can you do the production as customized?
Yes, we have a professional technique team, we could produce the fiberglass depends on your requirements.
4.what length of the fiberglass profiles?
Any length can be cut. according to customer requirements.
5.How to pay ?
Usually by T/T , L/C , Paypal, Western Union also ok.
Contact me:
Audited Supplier 
){kind=link}