Fiberglass Pultruded Structures Angle/H beam/T Bar/U Channel/Rectangular Square Tube Pipe FRP Profiles for Building Material
FRP(Fiberglass-Reinforced Plastics) is a general termrelating to the reinforcement of plastic with fibrous glass.Typically,thisextends the operating temperature of the material to approximately 230ºF(110ºC)and the tensile strength(in psi) to approximately ten times that of PVC.
The FRP profiles are made by the Pultrusion process in which the glass reinforcement fiber is impregnated with thermosetting resion and pulled througha heated die to produce a fully cured,high strength finished profile.they have the features of corrosion resistant,light weight and high strength,low maintenace,dimensional stable and environment friendly.FRP profiles include tubes,rod,channel,beams,angle,plateand custom made shapes.Profiles can be used for electric reactor,constructing platforms, handrails, walkways,bridges,cable tray etc.
Detailed Specification Thickness Size List of Frp Profiles:
L Beam |
Width/Height/Thickness mm |
Weight g/m |
50*50*3mm |
580 |
Side length/Side length/Thickness:50*70*3mm 45 degree |
FRP Round Rod |
Diameter mm |
Weight g/m |
Remark |
Φ3.5 |
18 |
|
Φ4 |
24 |
|
Φ4.5 |
30 |
|
Φ5 |
37 |
|
Φ6 |
19 |
Semicircle |
Φ6 |
58 |
|
Φ8 |
96 |
|
Φ10 |
150 |
|
Φ12 |
215 |
|
Φ12.5 |
240 |
|
Φ14 |
300 |
|
Φ16 |
388 |
|
Φ20 |
595 |
|
Φ25 |
970 |
|
Φ36 |
1980 |
|
Φ32 |
1560 |
|
And 37/40/50 |
FRP Round Tube |
Spec(OD/ID) mm |
Thickness mm |
Weight g/m |
Φ12.5×6.5 |
3.0 |
180 |
Φ14×10 |
2.0 |
164 |
Φ15×5 |
5.0 |
305 |
Φ20×5 |
7.5 |
570 |
Φ30×26 Pullwinding |
2.0 |
325 |
Φ36×30 |
3.0 |
606 |
Φ40×34 Pullwinding |
3.0 |
665 |
Φ50×43 Pullwinding |
3.5 |
900 |
Φ50×26 |
12.0 |
2800 |
Φ50×42 |
4.0 |
1120 |
Φ60×50 |
5.0 |
1680 |
Flat Bar |
Width mm |
Thickness mm |
Weight g/m |
18 |
2.00 |
68 |
13 |
6.00 |
160 |
19 |
6.00 |
227 |
25 |
6.00 |
280 |
30 |
6.00 |
345 |
31 |
5.00 |
290 |
26 |
5/10 |
(trapezoid) |
27 |
5/10 |
300(trapezoid) |
50 |
9.00 |
870 |
Rectangular Tube/Rod |
Width/Height/Thickness mm |
Weight g/m |
|
35×20×3 |
540 |
|
60×30×(3/4) |
1060 |
|
60×30×5 |
1500 |
|
76×40×5 |
1780 |
|
90×38×3.8 |
1750 |
|
100×50×4 |
2300 |
|
120×80×2.5 |
1900 |
|
125×75×5 |
3700 |
|
125×75×2.5 |
1850 |
|
128×88×4 |
3280 |
|
170×32×8 |
5800 |
|
53*56mm Rod |
Square Tube/Rod |
Width/Height/Thickness mm |
Weight g/m |
|
50×50×4 |
1450 |
with cap die |
50×50×6 |
2000 |
|
70×70×5 |
2540 |
|
75×75×6 |
3250 |
with cap die |
100×100×5 |
3750 |
|
100×100×6 |
4500 |
with cap die |
100×100×10 |
7060 |
with cap die |
120*120*7.5 |
6500 |
7/10mm I/O |
L Beam |
Width/Height/Thickness mm |
Weight g/m |
|
50*50*3mm |
580 |
|
Side length/Side length/Thickness:50*70*3mm 45 degree |
U-Chanel |
Width/Height/Thickness mm |
Weight g/m |
Draw |
29×40×4 |
800 |
|
40.3×18×4.5 |
455 |
|
80×30×4.8 |
920 |
|
84*40*7 |
2060 |
|
90×30×4 |
1040 |
|
90×40×5 |
1500 |
|
99×15×4 |
910 |
|
100*50*7 |
2550 |
|
107×19×4 |
1060 |
|
129×15×4 |
1150 |
|
137×19×4 |
1290 |
|
T beam |
Spec mm |
Weight g/m |
Draw |
16×25 |
395 |
|
16×30 |
415 |
|
66×34×5 |
844 |
|
I beam |
Spec mm |
Weight g/m |
Draw |
6×6 |
61 |
|
8.5×Φ13 |
175 |
|
11×Φ15 |
243 |
|
12×15 |
220 |
|
12×19 |
270 |
|
15×25.4 |
400 |
|
15×38 |
626 |
|
25×50.8 |
655 |
|
30*50 |
620 |
Thickness 3mm |
150×150×10 |
8800 |
With Anti slid slot |
150×150×12 |
11200 |
|
200×200×15 |
18500 |
|
Tooth Tube |
Diameter/Thickness mm |
Weight g/m |
Draw |
Φ36×5 |
723 |
|